franspeed tourer or tsr evo
-
garry inglis
- registered user
- Posts: 1298
- Joined: Tue Jul 21, 2015 8:04 pm
- Main scooter: ts1 230 and rb200
- Location: darlington
- Contact:
when I first tried to set mine at17 the stater would not go round far enough only to about 19/20 so I reamed the slots to get 17 once I new it was correct I bought a bgm 120w and that fit great as it has extened slots I have kept the 96w as a spare what a difference to the lights with the 120w stater from bgm
What output is your regulator ? I tried a rebuild bgm on mine with a duccati 80w regulator and wasnt impressed I swapped it for a "swiss" 96w and lights were brighter , then gave up and went full DC with a rebuilt indian stator and small battery now I have propper lights 
with no dipping when the large dc horn is applied cost me about 70 quid to go full dc
with no dipping when the large dc horn is applied cost me about 70 quid to go full dcWe sleep soundly in our beds because rough men stand ready in the night to visit violence on those who would do us harm
-
garry inglis
- registered user
- Posts: 1298
- Joined: Tue Jul 21, 2015 8:04 pm
- Main scooter: ts1 230 and rb200
- Location: darlington
- Contact:
hi shocky not sure what the regulator its a duccati so is the coil I got the full set off beedspeed last year stater flywheel coil regulator for £160 worked great but my li crank bearing went so while out changed to gp road crank rt195 and new stator and gp flywheel