stopping power for a Lambretta isnt limited to hydraulics

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
User avatar
Muttley McLadd
registered user
Posts: 1496
Joined: Wed Jan 07, 2009 6:32 pm
Contact:

eden wrote:Lol
To which bit? :lol:
CakeAndArseParty
slangen
registered user
Posts: 171
Joined: Sun Sep 16, 2012 7:45 pm
Main scooter: TV200
Contact:

Muttley McLadd wrote:
eden wrote:Lol
To which bit? :lol:
Epic thread
Scooterdude
registered user
Posts: 796
Joined: Sat May 28, 2016 4:51 pm
Main scooter: Lambretta LI 125 S3
Location: Skaville
Contact:

So after reading some of this thread (not all of it) I'm wondering if simply swapping the front brake arm for a longer clutch arm would increase braking power? Anyone tried it?
User avatar
Doom Patrol
registered user
Posts: 1823
Joined: Wed Jan 07, 2009 5:03 pm
Main scooter: Jet 200
Location: Second star on the right and straight on till morning
Contact:

We always like a guinea pig. :D
hendy
registered user
Posts: 859
Joined: Mon Jul 07, 2014 10:34 am
Main scooter: lambretta li 125
Location: Tyne and Wear
Contact:

Scooterdude wrote:So after reading some of this thread (not all of it) I'm wondering if simply swapping the front brake arm for a longer clutch arm would increase braking power? Anyone tried it?
I tried. You need to bend it away from the rim. Also, the thingummy (trunnion?) that the cable end goes into after reverse pulling is too big for the notch in the clutch arm. The slot in the clutch arm is too small for the thicker brake cable.

I do think it's worth doing for two reasons: you'll get greater leverage, but more importantly you'll get better control. Mine really is too much for the suspension. I've got the bike in bits at the moment so I'll have a go at doing it properly; I was a bit lazy last time I prodded around at it.

I've got around £500 worth of brake components for my next project and I tend to think it's probably a waste of money!
Scooterdude
registered user
Posts: 796
Joined: Sat May 28, 2016 4:51 pm
Main scooter: Lambretta LI 125 S3
Location: Skaville
Contact:

Thanks for the replies guys, am thinking along the lines that I'm going to have potentially 20bhp when I get back on the road instead of 7 or 8 so possibly need to look at doing something I don't want a disc brake, like an expansion chamber it kills the look for me, may go for a reverse pull conversion using the standard arm then.
storkfoot
registered user
Posts: 1154
Joined: Thu Jan 08, 2009 12:08 am
Main scooter: '70 GP150 [TS1 225]
Location: Merseyside
Contact:

Best brake I have ever managed to set up is an inboard hydraulic on my 20bhp TS1. I did a reverse pull inboard disc on a 16/17bhp engine which, after quite a bit of fettling, worked well. The hydraulic was better though.

That said, I believe outboard front hydraulic brakes can be too fierce.
User avatar
Doom Patrol
registered user
Posts: 1823
Joined: Wed Jan 07, 2009 5:03 pm
Main scooter: Jet 200
Location: Second star on the right and straight on till morning
Contact:

So they say. But there must be any amount of peds out there with disc brakes that probably give a bit more feel. Has anyone adapted one of those?
rosscla
registered user
Posts: 4823
Joined: Tue Oct 25, 2011 9:50 pm
Main scooter: Lambretta
Location: Lanarkshire
Contact:

Zip front wheel can, allegedly, be adapted.
"Our dilemma is that we hate change and love it at the same time; what we really want is for things to remain the same but get better."
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: Majestic-12 [Bot] and 9 guests