Jockey's Halogen Conversion & SIP Speedo

[Barry Smyth]

G'Day,

Has anyone had any experience with installing both the Jockey's halogen http://www.jockeys-boxenstop.de/shop/en ... -3883.html kit and the SIP speedo in a series 3 lambretta heasdset?

I have heard there is not a lot of room left in the headset once you put in the little SIP black boxes!

Any pictures would be awesome

Cheers in advance
Barry

[Tractorman]

There was not much room on my series 2 for the sip black box so I moved it to the engine compartment using the extension cable supplied in the kit.

[Timbo]

I've done it but on a GP. A tip I learnt was to buy strips of Velcro, and Velcro the black box to the side of the headset (inside obviously ) No idea if there's similar space in your headset.

[Minority]

Fitted my SIP black box behind the horncasting:

[Train Driver]

All fits snuggly in my Li150, I have both and both work fine.

[Fux]

I have both in my S2.

I cut some of the plastic on the back of the light housing to fit it in the headset.

My horncast is a pain to fit so if the black box goes tits up, its easier to get to.

[lambro]

I always fit the blackbox's at the rear of the scooter.
Easy to get to if it packs up.
PX's inbehind the spare wheel, Lambretta's in the rear by the reglator.
I don't have a jockey's light, but box fitting is the same