BGM Clubman on a Muggy?

[alanscottj]

Has anyone on here tried a BGM big bore clubman on a Mugello 186 or 198???

[roli-olo]

Yes I use one on a muggy 198.It works very well.

[alanscottj]

Yes I use one on a muggy 198.It works very well.

What carb you using?

[Shipleystevep]

Me too on a 186, went from 26 dellorto 42 clubman to 30 dellorto BGM clubman. Transformation, love it

[alanscottj]

Me too on a 186, went from 26 dellorto 42 clubman to 30 dellorto BGM clubman. Transformation, love it

Gonna try it when it arrives tomorrow on my 186, it has a 26mm dellorto on it at the mo, do you think that will be ok?

[roli-olo]

I have a 26mm Dellorto on mine.I,m using a breathe sweet filter I,ve run it open mouth too.Works well either way.

[Timbo]

I have a 200 Mugello on my SX 200 22 delly through air box and very recently fitted the BGM Clubman. It added 5 mph to my top speed and no was quicker and smoother through the gears. Don't forget it will need painting, use BBQ paint...

[alanscottj]

It has arrived! Looks good Any suggestions on changing jetting? I have had a really old KBA clubman on it so do you think I should upjet the main? Then do some chops.........

[Shipleystevep]

My 30 (courtesy of scooterotica dyno - thanks Dan), is
122 main, 52 pilot, AV266 X7, 35 slide. Dunno is thats relevant to you.

Make sure you degrease it well then B&Q bbbq paint.

Enjoy

[alanscottj]

My 30 (courtesy of scooterotica dyno - thanks Dan), is
122 main, 52 pilot, AV266 X7, 35 slide. Dunno is thats relevant to you.

Make sure you degrease it well then B&Q bbbq paint.

Enjoy

Nice one, mine is a 26mm but I'm sure I'm not far off your jetting. I'll be having a look later