Panel Hook Retaining Clips
Which way do they go in, the tear in the metal must do something?
-
bristolmod
- registered user
- Posts: 1741
- Joined: Wed Jan 07, 2009 8:42 am
- Main scooter: Lambretta TV175 S3- what else!
- Location: Bali-Hai bar, Locarno Ballroom Bristol, 1967!- mines a Brown Split!!
- Contact:
the "prong" on the clip faces inwards, so that when the "W" bracket hangs down to facilitate a rear wheel change, the prong guides it back into place when its raised.
Does that make any sense?
Chris
Does that make any sense?
Chris
Scootering since 1968.
Thanks so the prong is at the top?
Sent from my GT-P5110 using Tapatalk
We sleep soundly in our beds because rough men stand ready in the night to visit violence on those who would do us harm
-
bristolmod
- registered user
- Posts: 1741
- Joined: Wed Jan 07, 2009 8:42 am
- Main scooter: Lambretta TV175 S3- what else!
- Location: Bali-Hai bar, Locarno Ballroom Bristol, 1967!- mines a Brown Split!!
- Contact:
sorry- probably my bad.
Are you referring to handled side panels or non handled ones?
Chris
Are you referring to handled side panels or non handled ones?
Chris
Scootering since 1968.