Ill give the multimeter a go, how do you mean by wire it in series?
Unplug the + or - from the battery with the multimeter on that plug and the battery?
Ive already fitted and connected up the relay but I guess that I can unplug the wire from the battery
Battery going flat
-
purple_pill67
- registered user
- Posts: 228
- Joined: Mon Dec 05, 2011 3:29 pm
- Main scooter: Jet200
- Location: Gloucester
- Contact:
-
coaster
- registered user
- Posts: 3125
- Joined: Wed Jan 07, 2009 12:35 pm
- Location: London and Norfolk
- Contact:
Yes, that is what you do but bare in mind that most meters require you to plug the red positive lead into a different hole on the meter in order to measure amps, sometimes 2 separate amps hols are available in which case start off with the highest amperage and if you get a very low or tiny reading drop down to the lower amperage range. DON'T forget to put the meter lead back in the voltage/resistance position when your are finished or you will blow a fuse next time you use itpurple_pill67 wrote:Ill give the multimeter a go, how do you mean by wire it in series?
Unplug the + or - from the battery with the multimeter on that plug and the battery?
Ive already fitted and connected up the relay but I guess that I can unplug the wire from the battery