barnsleybilly wrote:
Lots of patience, shims and pulling through with the nut. Maybe freeze the layshaft to give a nats more clearance is the only mad brainwave I can come up with.
!
Good suggestion, thanks
Me layshaft
-
Snails
- registered user
- Posts: 397
- Joined: Thu Jan 15, 2009 1:42 pm
- Location: Sunny Manchester
- Contact:
Good suggestion, thanks
-
Snails
- registered user
- Posts: 397
- Joined: Thu Jan 15, 2009 1:42 pm
- Location: Sunny Manchester
- Contact:
wack 63 wrote:I measured an Italian one at 24.98 mm with a micrometer.
Thanks that's really helpful. Mine is also 24.98. Measuring the hole in the bearing I get 24.62. I possibly need to speak to SR then.