I am on with rebuilding my eibar s2.
I have a 12v electronic stator and flywheel. I have bought an electronic wiring loom from AF Rayspeed.
Can I run the lights etc with a kill switch and handle bar switch or do I need to buy a new key operated switch? Will it fit into the s2 headset?
Who would you recommend for the switch?
Robbie
series 2 electrics
-
wrecklessrobbie
- registered user
- Posts: 394
- Joined: Thu Jan 09, 2014 7:34 pm
- Main scooter: li150
- Location: York
- Contact:
-
Toddy
- registered user
- Posts: 6245
- Joined: Sun Mar 08, 2009 12:01 am
- Main scooter: Lambretta Series 1
- Location: East Yorkshire
- Contact:
quick answer, the choice is yours kill switch or ignition as long as you have the correct handlebar switch, ive used casa ignition switches , good fit and work fine 
As my Dad used to say "Each to their own lad"
-
wrecklessrobbie
- registered user
- Posts: 394
- Joined: Thu Jan 09, 2014 7:34 pm
- Main scooter: li150
- Location: York
- Contact:
Ok thank you for the reply.
What switch do i need? I have a series 2 one at the moment.
A while back i was in my waggon travelling from hemingbrough to howden/ m62.
I followed you until you turned into howden. You were doing a healthy 45 all the way.
What switch do i need? I have a series 2 one at the moment.
A while back i was in my waggon travelling from hemingbrough to howden/ m62.
I followed you until you turned into howden. You were doing a healthy 45 all the way.
-
Toddy
- registered user
- Posts: 6245
- Joined: Sun Mar 08, 2009 12:01 am
- Main scooter: Lambretta Series 1
- Location: East Yorkshire
- Contact:
wrecklessrobbie wrote:Ok thank you for the reply.
What switch do i need? I have a series 2 one at the moment.
A while back i was in my waggon travelling from hemingbrough to howden/ m62.
I followed you until you turned into howden. You were doing a healthy 45 all the way.
Running in
As my Dad used to say "Each to their own lad"
-
wrecklessrobbie
- registered user
- Posts: 394
- Joined: Thu Jan 09, 2014 7:34 pm
- Main scooter: li150
- Location: York
- Contact:
It was also windy as a windy thing that day . 
-
HxPaul
- registered user
- Posts: 1110
- Joined: Fri Dec 06, 2013 1:58 pm
- Main scooter: lambretta Li 150
- Location: Halifax,Yorkshire
- Contact:
I have an Italian series 2 running on a 12v system.I fitted an ignition switch and run all the electrics from that ie. ignition,pilot light and headlght.I use the standard handlebar switch but converted it so that I can use just dip/main beam and horn.wrecklessrobbie wrote:I am on with rebuilding my eibar s2.
I have a 12v electronic stator and flywheel. I have bought an electronic wiring loom from AF Rayspeed.
Can I run the lights etc with a kill switch and handle bar switch or do I need to buy a new key operated switch? Will it fit into the s2 headset?
Who would you recommend for the switch?
Robbie
-
lammydave
- registered user
- Posts: 200
- Joined: Wed Jan 07, 2009 1:13 pm
- Main scooter: Li150Special RT195
- Location: Ashford, kent
- Contact:
if you are looking at decent ignition switches, the new ones from scootopia are excellent and cheaper than casa
Li150 S2 1959. Li150 Special 1964. GP125 1970. Jet 200 Performer 1981. 1967 Sx150. 1959 Li150 S1. 1968 li125 Series 4
-
wrecklessrobbie
- registered user
- Posts: 394
- Joined: Thu Jan 09, 2014 7:34 pm
- Main scooter: li150
- Location: York
- Contact:
Ok thanks guys.
I may yet still use the kill switch. I have been stripping and rebuilding the kill switch and light switch. Both have come up well, in a rusteration looking sort of way.
Next question
Can i use a 25mm dellorto with a series 2 airbox.
Do i need to drill holes in the airbox. If so how many?
I may yet still use the kill switch. I have been stripping and rebuilding the kill switch and light switch. Both have come up well, in a rusteration looking sort of way.
Next question
Can i use a 25mm dellorto with a series 2 airbox.
Do i need to drill holes in the airbox. If so how many?