Replacement piston ........ Which one?

[alanscottj]

Ok, I have to buy a new piston in the morning, the one I'm replacing, due to being holed, is Mugello 198cc, 66mm, modified to work with reed valve (skirt cut and windows cut). Do I need to buy a Mugello one and have the work dne again or are there 66mm Pistons out there that already have the windows and skirt done? Any thought most appreciated as always

[speedy]

Not sure what length conrod your using, but Ben at AF has used the RB 20 piston in em, but that piston uses the 116mm rod,cheers,Speedy.

[alanscottj]

Not sure what length conrod your using, but Ben at AF has used the RB 20 piston in em, but that piston uses the 116mm rod,cheers,Speedy.

Not sure on size, I just replaced the original crank, GP, with a Mec Eur road/race crank. So it would be a standard size, whatever that is

[speedy]

Aha that would be 107mm then. Probably best to look at other options then I'd of thought.cheers,Speedy.

[alanscottj]

Spoken to Cam Lam this morning and they recommended the Imola piston so have ordered one and will start all over again!!!

[corrado]

I'd imagine that Cam Lam mean the Monza 200 piston.

[alanscottj]

I'd imagine that Cam Lam mean the Monza 200 piston.

Why not the Imola?