There is an air temp sensor and cylinder temp sensor. No stepper for idle.WINTERMODEL150 wrote: Hi Rich.what sort of fuel pressure would you estimate these to run at?how is the cold start enrichment device worked out if its air cooled?is there a sensor under spark plug or in exhaust?do you run a stepper motor for the idle or just a cable effect?.
Regards
Dean
Lambretta Series 2 with Megasquirt EFI and 180w Igntion Syst
-
Rich_T
- Dealer
- Posts: 540
- Joined: Fri May 29, 2009 8:07 pm
- Main scooter: Li Special
- Location: Birmingham
- Contact:
-
WINTERMODEL150
- registered user
- Posts: 436
- Joined: Sun Oct 17, 2010 5:31 pm
- Main scooter: lambretta ld auto
- Contact:
I guess if you're not using a choke from cold anymore they'll be some kind of fuel enrichment device to stop the bike stalling from cold?Rich_T wrote:There is an air temp sensor and cylinder temp sensor. No stepper for idle.WINTERMODEL150 wrote: Hi Rich.what sort of fuel pressure would you estimate these to run at?how is stalling runart enrichment device worked out if its air cooled?is there a sensor under spark plug or in exhaust?do you run a stepper motor for the idle or just a cable effect?.
Regards
Dean