Fast flow tap jetting

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
Post Reply Previous topicNext topic
jock11
registered user
Posts: 4
Joined: Sun Mar 08, 2015 3:28 pm
Main scooter: lml 150 5 port
Contact:
Contact jock11

Anybody know if you have to change jets after fitting a fast flow tap? Since fitting takes about 20 kicks to start and Now getting a lot of flooding issues
Top
Chris in Margate
registered user
Posts: 379
Joined: Thu Sep 03, 2009 7:53 pm
Main scooter: Lambretta 1964 225 Special
Contact:
Contact Chris in Margate

You could be "overcooking" the throttle when trying to start OR float is faulty. Check float is closing needle valve and do NOT use throttle when kicking over because it will flood.
No impact whatsoever if originally jetted correctly.
Top
Post Reply Previous topicNext topic

Return to “Lambretta Tech”

  • Information

  • Who is online

    Users browsing this forum: No registered users and 16 guests

Powered by phpBB™ • Design by PlanetStyles