I need a new rear hub but unsure which to get. Last time I had to buy one there were a few dodgy remade hubs about. I've been looking about and the ones I've seen vary in price and I take It quality!
Should I be looking at Italian remade F.A or Ramp. There are MB ones and also Scooter restorations do a SIL one. Which one is going to be good quality at a reasonable price
Which Rear Hub
-
psychsteff
- registered user
- Posts: 15
- Joined: Fri Feb 06, 2015 10:38 am
- Contact:
-
purple_pill67
- registered user
- Posts: 228
- Joined: Mon Dec 05, 2011 3:29 pm
- Main scooter: Jet200
- Location: Gloucester
- Contact:
Uni,which mb and af do, sil from s.r. Or the new Scootopia ones.
Ive had a Uni fitted for the last 4 or so years with no issues.
Ramp are the ones to avoid iirc
Ive had a Uni fitted for the last 4 or so years with no issues.
Ramp are the ones to avoid iirc
-
Doom Patrol
- registered user
- Posts: 1823
- Joined: Wed Jan 07, 2009 5:03 pm
- Main scooter: Jet 200
- Location: Second star on the right and straight on till morning
- Contact:
Avoid Ramp hubs like the plague. As has already been said the UNI hubs are very good. Having said that I was down at Scootopia the other day looking at their hubs and they are excellent quality.
-
Timbo
- registered user
- Posts: 1276
- Joined: Tue Mar 03, 2009 2:46 pm
- Main scooter: SX200 and GP230 RT
- Location: Luton area.....
- Contact:
http://www.justlambretta.com ......and can come painted...
UNI rear hub silver w/cone & studs JJ007
Including studs and cone.
Choose from colour options...Silver, Black or White
Shipping prices are for UK Mainland only - contact me for a price, if you are outside this area.
£41.99
(+ postage: £7.00)
Options: Make payments with PayPal - it's fast, free and secure!
UNI rear hub silver w/cone & studs JJ007
Including studs and cone.
Choose from colour options...Silver, Black or White
Shipping prices are for UK Mainland only - contact me for a price, if you are outside this area.
£41.99
(+ postage: £7.00)
Options: Make payments with PayPal - it's fast, free and secure!
Last edited by Timbo on Wed Mar 18, 2015 7:47 pm, edited 1 time in total.
-
psychsteff
- registered user
- Posts: 15
- Joined: Fri Feb 06, 2015 10:38 am
- Contact:
Thanks for the advice. I have decided to reuse my old hub. I took my engine to be vapour blasted and took my hub with me to see if they could clean it up and retap the extractor holes for me. No problem he said. So that should save me a few pounds. And I get to keep the original serveta hub.