70mm Piston
-
Fruitjuice
- registered user
- Posts: 201
- Joined: Fri Jan 09, 2009 8:26 pm
- Location: Ghent, Belgium
- Contact:
Are there any 70mm Jap/Wiseco/ProX pistons I could use in a Monza 225 barrel using a 116 rod 58 mm crank, that would be either cheaper and as good or more expensive and better than a Monza 225 piston?
Life shouldn't be a journey to the grave with the intention of arriving safely in a pretty, well preserved body, but rather to skid in broadside, in a cloud of smoke, thoroughly used up, totally worn out, loudly proclaiming: "WOW, WHAT A RIDE"
-
drunkmunkey6969
- Moderator
- Posts: 2838
- Joined: Sun Jan 04, 2009 1:42 pm
- Main scooter: '69 Lambretta GP
- Location: North Yorkshire
- Contact:
MB do a 70mm reed-valve race-tour piston for 115/116 rods.
Or there are a few Wiseco options.
Or there are a few Wiseco options.
See our YouTube scooter channel for Tech-help: https://www.youtube.com/c/TheScooterFactory/videos
-
Fruitjuice
- registered user
- Posts: 201
- Joined: Fri Jan 09, 2009 8:26 pm
- Location: Ghent, Belgium
- Contact:
Can anybody tell me what Wiseco pistons would match?drunkmunkey6969 wrote:MB do a 70mm reed-valve race-tour piston for 115/116 rods.
Or there are a few Wiseco options.
Life shouldn't be a journey to the grave with the intention of arriving safely in a pretty, well preserved body, but rather to skid in broadside, in a cloud of smoke, thoroughly used up, totally worn out, loudly proclaiming: "WOW, WHAT A RIDE"
-
davidblythe
- registered user
- Posts: 298
- Joined: Wed Jan 07, 2009 7:19 pm
- Location: Cheam, Surrey
- Contact:
16mm small end, kdx220
more choice with 18mm
more choice with 18mm