blue bearing
-
Tractorman
- registered user
- Posts: 5518
- Joined: Tue Apr 22, 2014 4:21 pm
- Main scooter: Lambretta li150 special
- Location: Lincoln
- Contact:
Is that the chip pan.dave411 wrote:You could boil the race in oil,or put it on a thick metal plate and heat the plate up
-
hendy
- registered user
- Posts: 859
- Joined: Mon Jul 07, 2014 10:34 am
- Main scooter: lambretta li 125
- Location: Tyne and Wear
- Contact:
I should have put it in the oven like I usually do but I was being lazy.
Ordered a drift now anyway, so I'll warm it gently to 150c or so if it doesn't go on too easily with the drift.
Just got to get the "blued" one off my brand new crank now. Time to crack out the bearing puller that comes out every 5 years or so.
Ordered a drift now anyway, so I'll warm it gently to 150c or so if it doesn't go on too easily with the drift.
Just got to get the "blued" one off my brand new crank now. Time to crack out the bearing puller that comes out every 5 years or so.