mikeck repacking - sorted thanks

[byron]

so fitted new bit of tube, only packing the last bit as per lofty's advice, it's fine, revs away and is [almost] back to its former self. just need to dial the carb in now as I have been playing with it to compensate for the broken exhaust.
thanks for advice on here,
lofty ~ cheers for remembering taking yours apart years ago and putting up the pic.

[mickjr]

Might be worth seeing if you can track down Eric Jack - formerly of Mikeck
He was selling Vespa pipes on Ebay last year under the seller name alleck
Old post here with sme info

GOOD NEWS FOR MIKECK FANS

eric jack co owner mikeck now called alleck
eric emailed me last night hes got a few bits a peices left in his work shop that he might finish off

Hi Mick,
Just to let you know i am still living, Got 1 T5 MK.3 exhaust left,
just about to put it on EBay. Got a number of exhausts for lambretta of
various types fof normal barrel and some for TS1 type mountings. (some
developement proto-types never been tried but will work of some way or
the other, putting the power down in different ranges. I do not have
any forward type smallframe vespas, as the ones we made in the past
were actually jigged off a full upside down scooter. Thanks for asking
about my new job, Ihave been there now for 12 months at the end of
August. (Time flies in) I am putting together some more T5/PX
125/150/185 that will be finished in the next few months or so. I am
not sure what to make them for as there are not to many T5's around any
more. Sorry for the delay in replying as i have been very busy at work
mate. Hope you are well will mail again.
Regards Eric Jack

[byron]

GOOD NEWS FOR MIKECK FANS

cool. thanks for the update.
800 miles later my Mikeck seems to be back to its good ol' self.