Electrex ignition wiring

[bogs]

Ok I have just got a 12v electrex ignition.
It has 5 wires coming out of the stator. Red white and green as normal that go to the cdi . Then it has 2 yellow wires as opposed to the usual single yellow wire.
The regulator/ rectifier has 4 ports. Earth , charge, feed from stator in and feed to lights out. So what's the second yellow wire from the stator for?

[Minority]

Don't the "normal" stators converted for Wassel DC have two yellow wires?
Just a thought.

[Pepot]

If you use an AC regulator or a DC half wave rectifier, you must conect the second yelow wire to earth (frame).

[bogs]

Thanks Pepot. Does it matter which yellow wire goes to the frame?

[Pepot]

Thanks Pepot. Does it matter which yellow wire goes to the frame?

No, it doesen't matter.

[bogs]

Thanks for your help Pepot ... Thumbs up

[Pepot]

Thinking about it. If the regulator has a full wave rectifier, then both yelow wires must go to the regulator (like in a wassel ). Then the exit port of the regulator would go to the battery. Check what kind of regulator is yours.

[bogs]

The regulator is a idm RR212 for ac lighting and dc battery charing made in Italy
It only has 4 ports but the stator has 5 wires,an extra yellow

[Pepot]

Since you are going to use a battery, wouldn't be better using a wassel regulator? You just would only have to replace your AC horn for a DC one and run the rest of things from the battery.