Hi when I eventually get my sp125 runner sorted i'll be looking to fit a 172 kit. What else do I need to change as a minimum requirement.
Cheers Dave
172 kit
id get an up gear kit as well and a 25mm dellorto what pipe you got
We sleep soundly in our beds because rough men stand ready in the night to visit violence on those who would do us harm
hi, the runner is completetly standard at the moment and I would like to keep it looking as near standard as possible.
cheers dave
cheers dave
once you have fitted the kit i would suggest a dyno session to make sure you have the right rollers. Would also suggest uprated clutch springs to make it faster when pulling off from a stand still. I found a scorpion pipe made quite a bit of difference to the performance of my 172 dragster and would reccomend one, as for the 25mm dellorto they too make more power but i took mine off again and put the standard carb back on because it was costing me £8 every 2 days in petrol compared to £6 for five days commuting on the standard carb.