My rb 22 kit after 6 years
-
psychedelicropcircle
- registered user
- Posts: 525
- Joined: Fri Aug 06, 2010 2:03 pm
- Main scooter: Series 1 li150 1958
- Location: north of hadrians wall
- Contact:
No pics to see...
- jonashford
- registered user
- Posts: 445
- Joined: Wed Oct 20, 2010 4:47 pm
- Main scooter: Lambretta SX RB235
- Location: GRIMSBY
- Contact:
Its just carbon, from lack of wide open throttle use. It will just poke out don't worry about it
-
speedy
- registered user
- Posts: 445
- Joined: Thu Jun 20, 2013 10:10 pm
- Main scooter: lambretta af s type ts1
- Contact:
Without getting into an oil thread/debate, just make sure that yer oil is one that is surposed to be low ash deposits etc. A mate of my brothers with a bike shop used to race 2 stroke crossers and rated Q8 oil above everything else, but stopped using it as the ash deposits were awful and blocked the exhaust port really badly. Just a thought.
- sean brady scooters
- Dealer
- Posts: 2040
- Joined: Mon Jan 05, 2009 12:09 pm
- Location: Ripon, North Yorkshire
- Contact:
shame we cannot see any piccys ,but after 6 years of continual use and however many miles without a decoke in that time i think its good that its still running at all ..those small sub exhaust ports sure will be the first to suffer from carbon/coke build up depending so much on your oil choice and % and how you ride it .
a good decoke may be all that it periodically requires to maintain performance but plz check your ring gaps for wear also
replace the rings if needed ,and clean out the ring grooves also as they can and do get stuck and gummed up ...
a good decoke may be all that it periodically requires to maintain performance but plz check your ring gaps for wear also
replace the rings if needed ,and clean out the ring grooves also as they can and do get stuck and gummed up ...
Sean Brady Scooters - 01765 690 698
-
rbgaz
- registered user
- Posts: 539
- Joined: Tue Mar 17, 2009 6:16 pm
- Main scooter: gp rb230 dragster 180lc
- Location: braintree lambretta breakfast club
- Contact:
I run 3 percent fully syth with shell nitride also put in a additive , the piston and head we very clean so y so much carbon in the sub ports ?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
