Just had a look at dans photo of his taffy on an RT kit. His looks a little high as well I wonder if he has had any bother with his.
Sent from my HTC Sensation Z710e using Tapatalk
Taffy copy pipe
Yes no wot u mean . I may look at something else now regards pipe
-
thebassmasta
- registered user
- Posts: 152
- Joined: Wed Jan 02, 2013 10:03 am
- Main scooter: GP TS1 240
- Location: Leicester
- Contact:
i have had 2 of these pipes, and honestly ive had no problems with them at all. first one i bought from dan, the tail can sat a bit low for my liking. the second one i bought (after ive tried all the other pipes) was bought from fleabay and sits just right
thebassmasta wrote:i have had 2 of these pipes, and honestly ive had no problems with them at all. first one i bought from dan, the tail can sat a bit low for my liking. the second one i bought (after ive tried all the other pipes) was bought from fleabay and sits just right
What kits have you had them on.
Sent from my HTC Sensation Z710e using Tapatalk
-
Chris-47
- registered user
- Posts: 49
- Joined: Thu Jan 02, 2014 11:52 pm
- Main scooter: Sx150 li125 gp200
- Contact:
My mate is going to cut the bracket off on the pipe weld a new one on and the tail pipe sits at a better angle you can get roughly 3 fingers in the gap between the pipe and underneath the runners and you still have a good clear clearance from the ground to the underneath of the pipe this is roughly how it will sit 
That's touching the kick start as you probably already know.
By the time its lifted clear of the kickstart and there is a slim scooter boy/girl sat on it.
That's still going to be close to the foot board.
Hope I'm wrong though.
Sent from my HTC Sensation Z710e using Tapatalk
By the time its lifted clear of the kickstart and there is a slim scooter boy/girl sat on it.
That's still going to be close to the foot board.
Hope I'm wrong though.
Sent from my HTC Sensation Z710e using Tapatalk
-
thebassmasta
- registered user
- Posts: 152
- Joined: Wed Jan 02, 2013 10:03 am
- Main scooter: GP TS1 240
- Location: Leicester
- Contact:
First pipe was on version 2 mugello and the second pipe was on imola ultimate
I bet TAFFSPEED are loving this...
I cant see why? They can start producing/selling them any time they like, its their choice not to. Maybe they will in future? Who knows?camel wrote:I bet TAFFSPEED are loving this...
These Taffy reps fill a gap in the market until that day though, and for £180 compared to £500 I'd rather have the copy. As far as I can see they look good, sound good and give good performance. A couple people seem to be having fitting issues, but their is only so much room for ANY exhaust to fit between the kick-start and runner board isn't there?