Well I've had a few questions about my bridge kits,so here's a bit of info.
I've been making and selling my kits for around 6 years sold many kits with positive response,the kit consists of 2 aircraft grade floating nuts with a 5mm thread,float.ing for alignment.
In the kit is 2 stainless steel laser cut plates with floating nuts riveted on,stainless screws csk cup washelrs 4 pop rivets and you even get a drill oh and a sticker...The two plates are easily lined up on the frame strut drilled and pop riveted on,once fitted it is out of sight out of mind.Now is the good bit especially if you have a disco fandango exhaust fitted.The usual struggling with that silly nut under your bridge is eliminated,you simply fit the screws from the top in seconds.
That's about it,
Cheers
[email protected]
Bridge kits
-
scootermap
- Dealer
- Posts: 3
- Joined: Sun May 27, 2012 8:46 am
- Main scooter: GP200
- Contact:
-
rosscla
- registered user
- Posts: 4823
- Joined: Tue Oct 25, 2011 9:50 pm
- Main scooter: Lambretta
- Location: Lanarkshire
- Contact:
Brilliant mod, but I don't recall getting stickers with mine. 
Stickers rock
Stickers rock
"Our dilemma is that we hate change and love it at the same time; what we really want is for things to remain the same but get better."
-
Honeymonster
- registered user
- Posts: 45
- Joined: Sun Mar 15, 2009 12:28 am
- Location: Lincoln
- Contact:
Brilliant bit of kit, no stickers with mine but had it a fair while. The only change I made was to use 5mm longer countersunk Allen screws for a positive location for the bit driver.
I have a kit Brand new in Bag ,With sticker .Happy Days 
Its one of the first things i bought for my project !!!
Its one of the first things i bought for my project !!!