Has anyone heard any rumours as to when the BGM P200 60mm cranks might be back in stock?
I was going to get a Pinasco instead but my local dealer has tested a few and says that they're not very well balanced.
BGM 60mm Cranks
-
ArmandTanzarian
- registered user
- Posts: 1103
- Joined: Wed Jan 07, 2009 6:26 pm
- Location: Kent
- Contact:
Meus Lambretta est non infractus. Is est quietus.
-
ArmandTanzarian
- registered user
- Posts: 1103
- Joined: Wed Jan 07, 2009 6:26 pm
- Location: Kent
- Contact:
Just had an answer to my own question from BGM
Sadly we don’t have a delivery date for the crankshaft yet.
If you need a crank now, I would take this at the moment:
7676163 Crankshaft -STOFFI Racing 60mm stroke- Vespa PX200 149,00 €
Very close copy of our bgm crankshaft!
If you have time, I would wait for the bgm one.
http://www.scooter-center.com/product/7 ... URBELWELLE
Sadly we don’t have a delivery date for the crankshaft yet.
If you need a crank now, I would take this at the moment:
7676163 Crankshaft -STOFFI Racing 60mm stroke- Vespa PX200 149,00 €
Very close copy of our bgm crankshaft!
If you have time, I would wait for the bgm one.
http://www.scooter-center.com/product/7 ... URBELWELLE
Meus Lambretta est non infractus. Is est quietus.
-
joeythescooterboy
- registered user
- Posts: 183
- Joined: Wed Jan 07, 2009 1:16 am
- Location: Chester
- Contact:
Thought the Pinasco one was supposed to be a good bit of kit?
Nemo saltat sorbius, nisi infanus est.
-
drunkmunkey6969
- Moderator
- Posts: 2838
- Joined: Sun Jan 04, 2009 1:42 pm
- Main scooter: '69 Lambretta GP
- Location: North Yorkshire
- Contact:
It is....joeythescooterboy wrote:Thought the Pinasco one was supposed to be a good bit of kit?
See our YouTube scooter channel for Tech-help: https://www.youtube.com/c/TheScooterFactory/videos
-
ArmandTanzarian
- registered user
- Posts: 1103
- Joined: Wed Jan 07, 2009 6:26 pm
- Location: Kent
- Contact:
He told me that he's had a couple that were out of balance. Since I wouldn't know how to tell a balanced crank from a poke in the eye I can't comment further.drunkmunkey6969 wrote:It is....joeythescooterboy wrote:Thought the Pinasco one was supposed to be a good bit of kit?
Meus Lambretta est non infractus. Is est quietus.
-
drunkmunkey6969
- Moderator
- Posts: 2838
- Joined: Sun Jan 04, 2009 1:42 pm
- Main scooter: '69 Lambretta GP
- Location: North Yorkshire
- Contact:
I'd love to see a balanced Vespa crank.......???
See our YouTube scooter channel for Tech-help: https://www.youtube.com/c/TheScooterFactory/videos
-
parmakit kid
- registered user
- Posts: 13
- Joined: Thu Feb 20, 2014 6:23 pm
- Main scooter: vespa px125
- Contact:
grt the worb 5 mazzy crank from sip its a great bit of kit just put a 60 stroke in mine iv heard some bad reports about the bgm ones
-
ArmandTanzarian
- registered user
- Posts: 1103
- Joined: Wed Jan 07, 2009 6:26 pm
- Location: Kent
- Contact:
I think the Mazz one is a bit too radical for my very mild tune. The inlet duration is a bit long.parmakit kid wrote:grt the worb 5 mazzy crank from sip its a great bit of kit just put a 60 stroke in mine iv heard some bad reports about the bgm ones
Meus Lambretta est non infractus. Is est quietus.