Cross hatching

[Tosh]

having used a 3legged glaze buster on the barrel to take some light score marks out I have then checked the rings down the bore
from top to bottom with correct ring clearance, i shone a light down the bore at the same time just to see if there was any light
between ring and bore but all is ok so what do I use to cross hatch the bore of the cylinder,

Ta Paul

[Tosh]

any takers

[sean brady scooters]

240 grit sandpaper would suffice

[ducksta]

i watched harry barlow cross hatch my cylinder with the honing tool, had a go myself after on a old barral he had couldnt do it, must be a art

[sean brady scooters]

there is a knack to it to be sure ...but its not rocket science ...simply an up and down and twisting motion .

[drunkmunkey6969]

there is a knack to it to be sure ...but its not rocket science ...simply an up and down and twisting motion .

Is this sex related?

[fastfrog]

[sean brady scooters]

yes chaps ,surely you know ?..its all in the wrist action

[Tosh]

thanks for the reply`s gents I`m going to have a go down and up and hope my wrist don't hurt

[Trojan]

Yep and don t stop until the task is completed mmmmmm wonder where that saying QUICK OFF THE WRIST came from