My scooter seems to have slowed down

[a.j]

So many people are fixated on BHP figures that they've forgotten about how a bike actually rides on the road. .. just make sure you're not focussing too much on BHP. Adam

Thanks for your help on this issue mate. I'm grasping all this final drive scenario now. I have ridden it to work the last two days & when it wasn't blowing a bloody hurricane, i.e yesterday, it middle laned it for 11 motorway miles. I am made up.

[Adam_Winstone]

Happy to help. Here's wishing you many more miles of happy riding

[Special X]

You say you have fitted a reed block have you ported out the inlet and changed the inlet timing radically to suit? If not try it without the reed.

[Special X]

New SR 67 + piston, Delly 28mm carb, reed block, augusto 6000, Kegra pipe, all just fitted, started yesterday

I thought that but the above suggests the reed might have just been fitted.

Hey Timbo how did you go on with the jetting problem?

[Timbo]

Took your advice and it seems spot on thanks. Still running in mind...

[a.j]

You say you have fitted a reed block have you ported out the inlet and changed the inlet timing radically to suit? If not try it without the reed.

All that was done at Puzzle scooters. It runs great, except my exhaust fell to bits yesterday, so if anyone has a useable ancillotti 42mm pipe they want to earn a few shekels from?

[nuttyboy]

I
hi is that puzzle scooters in Portsmouth
Sent from my KFTT using Tapatalk 2

[a.j]

Yes mate.