kytronic

[boris]

Ha my mates ride RBs I should have got a tow rope not a kytronic. Lol

Sent from my HTC Sensation Z710e using Tapatalk

[fast eddie edwards]

im about to fit one to my rb 250, im i right in asuming from the fiiting insrictions providid,you realy do need to no wot revs your engine runs at,ie run on dyno or have a revcounter fitted before setting you static timing,or has anybody out there put one on rb 250,to piont me inthe right direction??

[KTy]

Piece of advice; if you know your engine can work with a varitronic, then simply strobe your static timing at 24deg BTDC and choose curve 7 on your Smart Booster, that's a good starting point.
And make sure you properly secure the SB on top of the CDI

[Lamaddict]

I'm also building an RB250 but I'm going to leave the timing static at what Rayspeed recommends. I do like things like the Kytronic and I use an Agusto on my general run about scoot but not for something highly tuned just incase the timing settings heat things up too much.

[KTy]

It's up to you, of course.
If you do something "highly tuned", it makes little sense to "not tune it", don't you think ?
Keep in mind, for instance, that standard PX200 runs most of their life with 23deg BTDC static