Vespa Tuning Project.....

Anything related to Vespas... ask tech questions, post helpful info, or just read and learn.
Post Reply Previous topicNext topic
Jack221
registered user
Posts: 214
Joined: Mon Jul 29, 2013 8:18 am
Main scooter: PX221
Location: London
Contact:
Contact Jack221

Dan, Well done with the torque increase exactly where you need it!
What are your final port durations? And what about the jetting set up of your VHSH?

On my VHSH30CS I realised it wasn't running richer no matter how big the main jet, the DQ268 and K21 needle were not opening far enough at WOT. I had a spare K3 needle (1.5mm tip) so put that in on top clip and it was a bit spluttery at low rpm but high rpm jetted in well with a 160 main jet. Now really strong at high rpm again. I'm thinking a K31 should fix the low rpm running. Very interested to see what you have in yours :roll:
Vespa est ieiunas, quia semper operaturi
Top
Spanish Fly
registered user
Posts: 198
Joined: Tue Nov 30, 2010 1:23 pm
Main scooter: P200e
Contact:
Contact Spanish Fly

Looks like you got a good result there.
Did you try lengthening the pipe with a sleeve?
Top
User avatar
drunkmunkey6969
Moderator
Posts: 2838
Joined: Sun Jan 04, 2009 1:42 pm
Main scooter: '69 Lambretta GP
Location: North Yorkshire
Contact:
Contact drunkmunkey6969

Spanish Fly wrote:Looks like you got a good result there.
Did you try lengthening the pipe with a sleeve?
Had a sleeve made, just need to get round to trying it on the dyno etc.......
See our YouTube scooter channel for Tech-help: https://www.youtube.com/c/TheScooterFactory/videos
Top
User avatar
drunkmunkey6969
Moderator
Posts: 2838
Joined: Sun Jan 04, 2009 1:42 pm
Main scooter: '69 Lambretta GP
Location: North Yorkshire
Contact:
Contact drunkmunkey6969

Jack221 wrote:Dan, Well done with the torque increase exactly where you need it!
What are your final port durations? And what about the jetting set up of your VHSH?

On my VHSH30CS I realised it wasn't running richer no matter how big the main jet, the DQ268 and K21 needle were not opening far enough at WOT. I had a spare K3 needle (1.5mm tip) so put that in on top clip and it was a bit spluttery at low rpm but high rpm jetted in well with a 160 main jet. Now really strong at high rpm again. I'm thinking a K31 should fix the low rpm running. Very interested to see what you have in yours :roll:

I'll check on Monday when im back at work and let you know the carb settings........
See our YouTube scooter channel for Tech-help: https://www.youtube.com/c/TheScooterFactory/videos
Top
Adam_Winstone
registered user
Posts: 1693
Joined: Tue Jan 31, 2012 8:54 pm
Main scooter: Lambretta GP
Contact:
Contact Adam_Winstone

Was this jetting ever confirmed? I ask as I too am in the situation of trying to jet a 30 VHSH and have found that many of the recommended needle and atomiser combos become a restriction to main jet flow, hence some places recommend a 130-140 main, whilst others are recommending 170+. It is the larger MJ recommendations that I'm finding are limited by needle tip/atomiser.

I'm happy to keep plugging away/adjusting/testing myself, however, it is interesting to see what others have already done.

Ta

Adam
Top
User avatar
drunkmunkey6969
Moderator
Posts: 2838
Joined: Sun Jan 04, 2009 1:42 pm
Main scooter: '69 Lambretta GP
Location: North Yorkshire
Contact:
Contact drunkmunkey6969

Adam_Winstone wrote:Was this jetting ever confirmed?
All info on the dyno at Ripon and im not back there till Saturday now, will check then and post (unless i forget, which is highly likely - so keep pestering me! lol) :D
See our YouTube scooter channel for Tech-help: https://www.youtube.com/c/TheScooterFactory/videos
Top
Adam_Winstone
registered user
Posts: 1693
Joined: Tue Jan 31, 2012 8:54 pm
Main scooter: Lambretta GP
Contact:
Contact Adam_Winstone

Will do.

Ta
Top
Adam_Winstone
registered user
Posts: 1693
Joined: Tue Jan 31, 2012 8:54 pm
Main scooter: Lambretta GP
Contact:
Contact Adam_Winstone

Forgot the reminder yesterday :(
Top
User avatar
drunkmunkey6969
Moderator
Posts: 2838
Joined: Sun Jan 04, 2009 1:42 pm
Main scooter: '69 Lambretta GP
Location: North Yorkshire
Contact:
Contact drunkmunkey6969

Sorry. Lol. Monday definitely!!
See our YouTube scooter channel for Tech-help: https://www.youtube.com/c/TheScooterFactory/videos
Top
Adam_Winstone
registered user
Posts: 1693
Joined: Tue Jan 31, 2012 8:54 pm
Main scooter: Lambretta GP
Contact:
Contact Adam_Winstone

BUMP ;)
Top
Post Reply Previous topicNext topic

Return to “Vespa Tech”

  • Information

  • Who is online

    Users browsing this forum: No registered users and 22 guests

Powered by phpBB™ • Design by PlanetStyles