Malossi Polini swap?

Anything related to Vespas... ask tech questions, post helpful info, or just read and learn.
Post Reply Previous topicNext topic
philhnottm
registered user
Posts: 164
Joined: Sun Sep 26, 2010 2:12 pm
Main scooter: px (s)
Location: Nottingham
Contact:
Contact philhnottm

[quote="Train Driver"]Al did my polini 220cc it still uses the standard carb,auto lube and SiP road exhaust.
I haven't got the dyno sheets but Al said 19bhp & loads of torque, also getting 12 MPL
It made a bit more power using the polini induction but did 7/8 MPL :o[/quote



I have the same that Al built for me its OUTSTANDING !! Running JL RH and torque is like nothing ive ever owned .Makes my 210's no fun at all to ride. Mine runs the Polini induction.

Did 12 miles and used 1.66 lts of fuel but big smile on face !!

Given up food to pay form petrol !!
Top
User avatar
LI150
registered user
Posts: 630
Joined: Wed Jan 07, 2009 8:30 pm
Main scooter: Series 2 LI150
Location: East Yorkshire
Contact:
Contact LI150

Are these the old steel barrel or the newer nicasil ones
Cheers Tim
Top
Train Driver
registered user
Posts: 604
Joined: Wed Mar 11, 2009 11:32 am
Location: PE31 8PT (Posh bit of Norfolk)
Contact:
Contact Train Driver

LI150 wrote:Are these the old steel barrel or the newer nikasil ones
Cheers Tim
mine is the iron barrel, Al said he didn't know why as the ports are the same but the ally made more power.
I Loved the induction kit and wasn't that bothered with the consumption it was the running out in the middle of france that bothered me 8-) 8-)
TS1 and PX stay in the garage (future barn finds) out on the GTS 300 when I go out on a scooter.
I know I’ll get there and back
Top
User avatar
H,POOL GADGE
Posts: 190
Joined: Sat Mar 21, 2009 7:13 pm
Main scooter: vespa polini220/gts 300
Location: HARTLEPOOL
Contact:
Contact H,POOL GADGE

Image

http://farm8.staticflickr.com/7368/9373 ... e947_b.jpg


dyno reading - vespa px200e - polini alloy 210-pinasco reprofiled head 10:1-pinasco 60mm crank-24/24si carb 48/100 idle-140 air corrector-be3-125 main-standard 4th gear- carb inlet timing opened-crank inlet timing opened-exhaust port widened a touch -JL r/hander -
 pulls like a galloping horse, uphill and head on wind, with a dollup of high rev fun factor, over the moon with setup, 19 BHP + 17 TORQUE!!!

tune, work and dyno cutiously done by the legends DAN & SEAN @ Scootererotica!!!

first time with flickr, i tried!!!
Top
paul d
registered user
Posts: 305
Joined: Thu Jun 30, 2011 10:00 am
Main scooter: T5 172 Tv 240
Location: Galway Ireland
Contact:
Contact paul d

Sounds perfect. I'm shocked it runs ok with only a 125 main jet. It wasn't enough in my brother's polini iron barrel/grand sport/jl but it just goes to show that not every scooter runs well on the same set up, each individual case is different. Enjoy the miles!
Top
User avatar
H,POOL GADGE
Posts: 190
Joined: Sat Mar 21, 2009 7:13 pm
Main scooter: vespa polini220/gts 300
Location: HARTLEPOOL
Contact:
Contact H,POOL GADGE

the 125 main was perfect considering the weather/air temp, but a 128 main jet will be going innit, bit rich in summer but right in winter....

me scooter on dyno....

http://www.flickr.com/photos/99493712@N06/9376873485/
Top
User avatar
C*NTSPEED
registered user
Posts: 395
Joined: Wed Jan 07, 2009 11:44 am
Main scooter: vespa ts 125/200
Location: manchesto's beruit
Contact:
Contact C*NTSPEED

polini all day for foe me im afraid...no serious porting... revolver rhs pipe and pulls like a train...diablo done me top end but only touched the exhaust port....love it!
GEMINI S.C.
BLACK WIDDA'S S.C.
Top
User avatar
joeythescooterboy
registered user
Posts: 183
Joined: Wed Jan 07, 2009 1:16 am
Location: Chester
Contact:
Contact joeythescooterboy

Did he raise or just widen exhaust port Joe?
Nemo saltat sorbius, nisi infanus est.
Top
Post Reply Previous topicNext topic

Return to “Vespa Tech”

  • Information

  • Who is online

    Users browsing this forum: Google [Bot] and 8 guests

Powered by phpBB™ • Design by PlanetStyles
cron