BGM Stator/Flywheel Poll
slightly off topic, but a mate had an indian stator and AFR light flywheel fitted, and his rev counter wouldnt work properly, swapped to a BGM stator, and BINGO! rev counter working properly!
Wouldnt try to run one without first removing 1mm from mag housing.....This is a combination I have fitted with no problems also fitted to an MEC crank....Jonny G wrote:Af Lightened Flywheel, BGM 120W Stator and an MEC Crank. 1mm machined from the mag housing face. 300 miles with no probs whatsoever !!
-
ArKaTxU
- Dealer
- Posts: 340
- Joined: Wed Jan 07, 2009 8:26 am
- Main scooter: TV175 64-Jet200 68-Jet200 82
- Location: Rias Baixas
- Contact:
How to know if a flywheel is a new type? and the same with the BGM stators.RinB wrote:Any more voters
Another question are the AFR light flywheels old or new type ie new have a packer in between
boss & flywheel.
Also 120w BGM old or new ie new ie pickup is no located futher in Ie laminates taken off
from manufacture.