Cyclone box with drops.
as was mentioned the 1- 4 and 1 - 5 lever possition is the same .. the problem is that drop bars are more suited to the profile of gp leggies than the sx type
Its in bits scooter club: www.facebook.com/groups/132415046859320
-
Muttley McLadd
- registered user
- Posts: 1496
- Joined: Wed Jan 07, 2009 6:32 pm
- Contact:
It's a 30 second fix.
Tin snips. Legshields.. go..
Tin snips. Legshields.. go..
CakeAndArseParty
i fitted drops to a spaniard and the gear change housing and the hydraulic yam brake lever bolt were both fouling.....if you have the longer italian forks and already have been using the yamaha type master cylinder... you should be ok , you will find out soon enough 
let us know how it goes and good luck
let us know how it goes and good luckgabba gabba hey gabba we accept you one of us
-
10 inch Terror
- registered user
- Posts: 1447
- Joined: Tue Jun 29, 2010 9:17 pm
- Xbox live gamer tag: No.
- Playstation gamer tag: PLEASE!
- Main scooter: Lambretta LI Imola 185
- Location: Farnborough Hampshire
- Contact:
Why didn't I think of that?Muttley McLadd wrote:It's a 30 second fix.
Tin snips. Legshields.. go..
-
Timbo
- registered user
- Posts: 1276
- Joined: Tue Mar 03, 2009 2:46 pm
- Main scooter: SX200 and GP230 RT
- Location: Luton area.....
- Contact:
4th and 5th are in the same place as previously stated...Timbo wrote:Not sure this is true, best to check with Riminni or someone that's got drops. My cyclone in 5th appears to be further down.
Y got no more room in the gear box for y five speed as was for y four speed; so selector slides same same same; cables pull an push y selector tie rod same same so y still got same same for sure if y ain't mucked up your cables or y got slack in y headset or linkage,
C’est la vie