px200 polini venturi air intake,anyone fitted one
i bought the venturi kit the other week but weathers been crap,got back from scarboro and decided to fit it.
went on in no time and since SIP recommend going up 5-8 jet sizes on a standard motor,i went up by ten(130)
out for some plug chops and to cut a long story short,ive ended up with a main jet of 140 and the plug still looks a bit on the lean/hot side
it seems VERY high compared to the bits ive read on other peoples experience.
on the up side the scoot does feel nicer to ride but wether thats a placebo effect im not sure yet.
just a bit concerned of how high the jetting has gone to.
went on in no time and since SIP recommend going up 5-8 jet sizes on a standard motor,i went up by ten(130)
out for some plug chops and to cut a long story short,ive ended up with a main jet of 140 and the plug still looks a bit on the lean/hot side
it seems VERY high compared to the bits ive read on other peoples experience.
on the up side the scoot does feel nicer to ride but wether thats a placebo effect im not sure yet.
just a bit concerned of how high the jetting has gone to.
140 seems high
live life your a long time dead
-
Train Driver
- registered user
- Posts: 604
- Joined: Wed Mar 11, 2009 11:32 am
- Location: PE31 8PT (Posh bit of Norfolk)
- Contact:
It seems low to meducksta wrote:140 seems high
TS1 and PX stay in the garage (future barn finds) out on the GTS 300 when I go out on a scooter.
I know I’ll get there and back
I know I’ll get there and back