So... what are your opinions, or facts.....
as to what brand of connecting rod this might be?
Any guess as to what brand of con rod this might be.
-
Chris F
- registered user
- Posts: 67
- Joined: Tue Mar 23, 2010 11:19 pm
- Main scooter: 1967 Lambitsa 200
- Location: San Diego, California
- Contact:
I have this friend (seriously... it's not me) who has stripped his top end and doubts this is the mazzuchelli crank listed on the invoice from the dealer who installed it.
So... what are your opinions, or facts..... as to what brand of connecting rod this might be?
So... what are your opinions, or facts.....
as to what brand of connecting rod this might be?
-
junkyard
- registered user
- Posts: 44
- Joined: Tue Oct 06, 2009 10:29 pm
- Main scooter: SX230 TS1
- Location: Berkshire
- Contact:
Got two Mazzas sitting on the shelf and none of them have a conrod looking like that 
You sure ya mate hasnt got Mazza webs and a different rod fitted?The second picture looks like its got an "i" on it!!What set up is his top end as this may be a 116mm rod and the shop has billed him for Mazza webbs and re rodded to suit his kit
You sure ya mate hasnt got Mazza webs and a different rod fitted?The second picture looks like its got an "i" on it!!What set up is his top end as this may be a 116mm rod and the shop has billed him for Mazza webbs and re rodded to suit his kit Anytime you have a 50-50 chance of getting something right, there`s a 90% probability you`ll get it wrong.