Some other members on hear good in that department

Look out for a 2nd hand JL3, good compromise on torque v BHP, should work well with a Rapido or your stage 4.immylam wrote:hahaha -looked back on this old thread and stuck with the lammy ,in the end I got a stage 4 top end,changed the crank for one from beedspeed,a decent piston, light flywheel bgm stator a clubman 42 mil and 24 mil jettex carb - a bit better and close to 70 (downhill) , so I got a pm pipe for it recently .....and now worse , so have just bought a rapido 225 (classic) for it and now need an exhaust which will suit this kit as the pm takes it up into the 5.2's and doesn't pull 4th. So much for the budget!
immylam wrote:hahaha -looked back on this old thread and stuck with the lammy ,in the end I got a stage 4 top end,changed the crank for one from beedspeed,a decent piston, light flywheel bgm stator a clubman 42 mil and 24 mil jettex carb - a bit better and close to 70 (downhill) , so I got a pm pipe for it recently .....and now worse , so have just bought a rapido 225 (classic) for it and now need an exhaust which will suit this kit as the pm takes it up into the 5.2's and doesn't pull 4th. So much for the budget!
Mag wrote:I would be concerned about uping the power and using the Jet crank.
Presumably a GP race version?in the end I got a stage 4 top end,changed the crank for one from beedspeed,
you are not far off what you need, scooter loopy john got it right yonks ago.....rapdo classic 225 24mm mikuni through the box or a breath sweet filter and an ancilotti clubman or a mb/bgm when they come out in the new year. mec gp crank and rewired indian electronic kit.immylam wrote:hahaha -looked back on this old thread and stuck with the lammy ,in the end I got a stage 4 top end,changed the crank for one from beedspeed,a decent piston, light flywheel bgm stator a clubman 42 mil and 24 mil jettex carb - a bit better and close to 70 (downhill) , so I got a pm pipe for it recently .....and now worse , so have just bought a rapido 225 (classic) for it and now need an exhaust which will suit this kit as the pm takes it up into the 5.2's and doesn't pull 4th. So much for the budget!