Long Rod/Long Stroke?

[corrado]

After a bit of lookign around, is the RD400 rod the one to go for. I have found this rod, and is meant to be very high quality and used in many race engines from two stroke forums i have read.

http://www.pjme.co.uk/acatalog/copy_of_ ... _End_.html

Who would you get to build your crank?

Try Grampian motors too http://www.grampianmotors.co.uk/ They rebuilt a couple of SIL cranks with conrods for me a few years ago and the price was reasonable. SIL webs need maching to fit the wider Yam conrods.
Harry Barlow built my last crank, I'd use him again.

[corrado]

There's MrB too .... http://www.lambrettaspares.com/spares/c ... l0740.html

[Adam_Winstone]

Jerome at Readspeed is very well respected too.

[servetakid]

Grampians gave me a flat no when i mentioned the word lambretta.

[WINTERMODEL150]

After a bit of lookign around, is the RD400 rod the one to go for. I have found this rod, and is meant to be very high quality and used in many race engines from two stroke forums i have read.

http://www.pjme.co.uk/acatalog/copy_of_ ... _End_.html

Who would you get to build your crank?

Got the RD 400 con rod in my engine and I'm very happy with it,Darrell Taylor got my crank done for me.

Dean

[servetakid]

Cheers, i will PM him.