Sportique
I wish a hadn't seen this tread. I have an old vespa in my garage that i was going to ebay, but now having seen this.....................
I don't want to keep up with modern traffic. I want to hoon past it, preferably on one wheel!
And wasn't hard to fit the lammy fork if you have a spare one, but in saying that some of the German scoots with the cut-down PX or PK forks are nice to.wax wrote:I wish a hadn't seen this tread. I have an old vespa in my garage that i was going to ebay, but now having seen this.....................
-
Muttley McLadd
- registered user
- Posts: 1496
- Joined: Wed Jan 07, 2009 6:32 pm
- Contact:
Any dry build pics yet?
CakeAndArseParty
i Think the lambretta forks look great on yours, especially with that mudguard too. Good skills my friend!
I don't want to keep up with modern traffic. I want to hoon past it, preferably on one wheel!
No Worked all weekend, Only got one weekMuttley McLadd wrote:Any dry build pics yet?
before my Op and then 'I'm down for at least 3 weeks.
Bottom half is Indian GP and the top half is PX, with an insert and plug welded on both half's,Head set is SS180 with about 10mm trimmed off the bottom.wax wrote:i Think the Lambretta forks look great on yours, especially with that mudguard too. Good skills my friend!
Stripped and detailed the scootRS front disk.
More done, upper tank & plumbing finished.
More -4 fittings and some hose for the tank.
More -4 fittings and some hose for the tank.
Fork is All together
-
Muttley McLadd
- registered user
- Posts: 1496
- Joined: Wed Jan 07, 2009 6:32 pm
- Contact:
Chop chop.. 
CakeAndArseParty
Had two weeks off work because of my OP, been great for orginizing bits and peices, but still cant lift anything for about 3 weeks.Muttley McLadd wrote:Chop chop..
