tm 24 on a ts1

[cezeta]

has anyone done this? i know a number of tuners say it will work and with a bit of peak power lost but has anyone got a dyno of one or any first hand experience.

im trying to gt186 my ts1 240

[teamsequipe]

Funny, I nipped over to see David Blythe last night, ended up drinking tea and chatting for quite a few hours ! This exact subject came up, we're both of the opinion that a 24mm carb would be ideal for a slightly de-tuned TS1. Might be worth having a chat with David yourself, perhaps between the 2 of you, something could be arranged for your own dyno session ?

Cheers

DM

[Terrible Taff]

Funny, I nipped over to see David Blythe last night, ended up drinking tea and chatting for quite a few hours ! This exact subject came up, we're both of the opinion that a 24mm carb would be ideal for a slightly de-tuned TS1. Might be worth having a chat with David yourself, perhaps between the 2 of you, something could be arranged for your own dyno session ?

Cheers

DM

I believe that the following people have done this conversion:~
Scooter loopy john in Portsmouth with a TM24 on his TS1-225 & Simon Brace a 26mm Dellorto.

No contact details sorry!

If you do go down this route I am more than intersted to help out with the Dyno & Jetting work.
I have always believed that a 26mm carb should work well & improve ecconomy with only a small loss of power.
RD350LC Twin has 26mm Mikuni's & 60bhp! (175cc Cylinder 30bhp)

Ian

[Adam_Winstone]

also... reed valve Runners with 20+ bhp and 25mm Dellorto BIG CARB (?!) option.

[teamsequipe]

Funny, I nipped over to see David Blythe last night, ended up drinking tea and chatting for quite a few hours ! This exact subject came up, we're both of the opinion that a 24mm carb would be ideal for a slightly de-tuned TS1. Might be worth having a chat with David yourself, perhaps between the 2 of you, something could be arranged for your own dyno session ?

Cheers

DM

I believe that the following people have done this conversion:~
Scooter loopy john in Portsmouth with a TM24 on his TS1-225 & Simon Brace a 26mm Dellorto.

No contact details sorry!

If you do go down this route I am more than intersted to help out with the Dyno & Jetting work.
I have always believed that a 26mm carb should work well & improve ecconomy with only a small loss of power.
RD350LC Twin has 26mm Mikuni's & 60bhp! (175cc Cylinder 30bhp)

Ian

There you go Guys, can't say fairer than that.............. nice one Ian

Hope to catch up soon buddy, you doing the IW this year ??

Hope all is well.

Darrell

[Agent Buchwald]

Has a TM24 got enough casting and slide width to be bored out to 26mm?

[lockman69]

I replaced my Dellorto VHSB34 with a Dellorto PHBH 30MM Power jet on my TS1, no real noticeable difference in performance but 30%+ less fuel and a much nicer ride.

I tried the Mikuni TM24 and the TM(X) 30 MM carbs on TS1’s and stage 4 200’s and had nothing but trouble setting them up and always had temperature spikes that I couldn’t iron out, both set ups went on a dyno but ultimately the Mikuni’s just didn’t seem suited for my Lambretta’s, have had no issues with either of the dellorto’s .

[Bilko]

Im looking to putting a Dellorto 26mm and a Clubman of sorts on my Muggy 225.

[cezeta]

Funny, I nipped over to see David Blythe last night, ended up drinking tea and chatting for quite a few hours ! This exact subject came up, we're both of the opinion that a 24mm carb would be ideal for a slightly de-tuned TS1. Might be worth having a chat with David yourself, perhaps between the 2 of you, something could be arranged for your own dyno session ?

Cheers

DM

I believe that the following people have done this conversion:~
Scooter loopy john in Portsmouth with a TM24 on his TS1-225 & Simon Brace a 26mm Dellorto.

No contact details sorry!

If you do go down this route I am more than intersted to help out with the Dyno & Jetting work.
I have always believed that a 26mm carb should work well & improve ecconomy with only a small loss of power.
RD350LC Twin has 26mm Mikuni's & 60bhp! (175cc Cylinder 30bhp)

Ian

i will take you up on that, im always happy to pay but even more happy to pay someone with a bit of enthusiasm. you dynod it in 97.....should still be under warrenty

[timexit17]

Im looking to putting a Dellorto 26mm and a Clubman of sorts on my Muggy 225.

Thats exactly what I am doing at the mo, as soon as jetting is finalised I'll let you know.
bought all the parts from camlam ready jetted but they are way out (very rich).
spent a fortune on nedles and jets so far.

mugello 225, phbh26 and ancilotti 42mm downpipe.