clutch Slippin
-
- registered user
- Posts: 13
- Joined: Sun Feb 19, 2012 4:50 pm
- Main scooter: Gp200
- Contact:
I recently changed gear oil usng ST90 Rock oil on 1st longish ride the clutch slips in 4th gear when I'm cracking on it dosnt slip any other time at the moment. Could it be the oil or is clutch on the way out any advice gratefully accepted
-
- registered user
- Posts: 13
- Joined: Sun Feb 19, 2012 4:50 pm
- Main scooter: Gp200
- Contact:
cheers bizzly that sounds exactly what is happenin to mine,gonna change em with a mate in next couple of weeks did you change them straight away or was it ok for a bit ive got a close rideout i want to attend about 50 miles so was gonna do it after that any ideas on if it be ok for that
ta
ta
- bizzly
- registered user
- Posts: 198
- Joined: Mon Mar 28, 2011 9:00 am
- Main scooter: Lambretta GP
- Location: Sunny Scunny
- Contact:
I didn't change them for a week or so...I just couldn't accelerate too hard for a while when it got hot that's all...I survived...lol
The clutch plates on mine were fine when I changed the springs...no burning, worn etc
The clutch plates on mine were fine when I changed the springs...no burning, worn etc
-
- registered user
- Posts: 13
- Joined: Sun Feb 19, 2012 4:50 pm
- Main scooter: Gp200
- Contact:
Cheers for that mate gonna do it in next couple of weeks & will see if whole clutch needs doing its been in a while
- bizzly
- registered user
- Posts: 198
- Joined: Mon Mar 28, 2011 9:00 am
- Main scooter: Lambretta GP
- Location: Sunny Scunny
- Contact:
Got mine from MB....best ones Ive ever useddjh66 wrote:I have the same problem, when hot. Mine already has strong springs in, not sure of the quality though? Who makes decent strong clutch springs?