chiselspeed m tech unit

[heliscoot]

Scooters become a bugger to start and sometimes tries to kick back when kick starting I reckon timing issue. As I have just had the engine out I may have got the m tech unit wiring wrong. Can someone tell mw the correct connections as I m on a rally at mo cheers

[drunkmunkey6969]

its fairly simple.....the red wire from your stator/cdi should be unplugged from the cdi and inserted into the red wire/male connector from the mtech....and the other red wire/female connector from the mtech goes into the red slot on the cdi. The black wires from the mtech are simply earths.

[heliscoot]

Cheers for that.

[heliscoot]

Cheers for that.

Well just checked and that seems fine. Owt else that may give these symptoms. Once started seems ok and rode to cleggy fine at all speeds

[mcbrid]

I have one of these fitted to my TS1 and it does seem reluctant to kick off sometimes but then works a treat!

Dont suppose you could have adjusted the setting?

Not M tech expert though

[heliscoot]

No not touched it , Martin fitted it and dynoed it last year always started first kick. I.ll check it over tomorrow,strobe it up see what it's running at and do the other obvious stuff.

[heliscoot]

Well sods law it started first kick every time today so whether it was a poor connection somewhere or it just wanted to embarrass me outside a packed boozer. Anyway I ll call it a win. Cheers for the comments