Bought a 28phbh to replace my 25phbh, will be runing a standard mugello 200, clubman pipe and a 28phbh with a ram air filter.
Does anyone have the same setup and could point me in the right direction for jetting please?
Mugello 200 28phbh jetting help.
-
jonnyb
- registered user
- Posts: 42
- Joined: Tue Mar 20, 2012 9:39 am
- Main scooter: Li150 Special
- Contact:
You could try the jetting that I use on my 30mm Mugello V4 200 as a starting point, it should be a tad rich which wouldnt be a bad thing?
AV264 X13 second from top clip 45 slide 120 main 53 pilot.
I'm sure someone who has the same setup as you will be along soon
AV264 X13 second from top clip 45 slide 120 main 53 pilot.
I'm sure someone who has the same setup as you will be along soon
Thanks, it's only so I can get it running somewere neat before getting dyno'd
-
Special X
- registered user
- Posts: 407
- Joined: Wed Jan 07, 2009 9:38 am
- Main scooter: Lambretta 125 special 230cc
- Location: Wakefield
- Contact:
Take the main to 115 and you'l be in the ballpark for a PHBH 28.jonnyb wrote:You could try the jetting that I use on my 30mm Mugello V4 200 as a starting point, it should be a tad rich which wouldnt be a bad thing?
AV264 X13 second from top clip 45 slide 120 main 53 pilot.
I'm sure someone who has the same setup as you will be along soon
jonnyb wrote:You could try the jetting that I use on my 30mm Mugello V4 200 as a starting point, it should be a tad rich which wouldnt be a bad thing?
AV264 X13 second from top clip 45 slide 120 main 53 pilot.
I'm sure someone who has the same setup as you will be along soon
hello jonnyb
can you tell me what filter you use if at all?
cheers
mick