new 5/6 plate clutch for lambrettas

[rocho68]

Lee,
Will these be available soon? just a few questions as I am after a decent clutch, its on my Christmas list :anbrgin;
1) is it part ex the rear sprocket or are you selling them in either 46 or 47 crownwheel
2) is the centre hardened or do they use the GP style bronze bush
3) will they work on the LI/SX clutch set up with the nipple or is it GP style only
4)Have you finalised a price yet
Cheers Dave

Hi Lee.
Can you answer to this questions please?
Thanks!

Hi , i do both 46 or 47 , as for the centres most 46 crownwheels are hardened but the 47 will be the bronze bush type and as for cost anyone who wants one from off this site then there 230 outright otherwise it would be 250 ! Pm me for details

[rocho68]

right boys and girls , finally got somewhere with my own redesign ,no longer using aprillia baskets and plates due to machining time and availability , im now using a yamaha derived plate and my own cast basket that im now happy with , ive currently machined ten 5 plate 46 tooth clutches and am about to start on the 47 tooth version , cost is £200, £180 if you supply the correct exchange crownwheel ....







also i can machine the basket to individual spiders , ie foxhat , mb to make them 5, 6 ,7 ,8 plate motorcycle style plates !
pm for details ....................

[RICSPEED]

very good sir

[Andy Pickering]

Looks a great of kit Rocha

Sent from my GT-I9000 using Tapatalk 2

[paulmgreen]

What kid of engine power has the latest design been tested with?

[rocho68]

Hi paul ,the 5 plates are good for high 20s and out perform its lambretta alternative , i machined the five plates due to requests but the casting allows for any plate combination so it really is down to what the individual requires as theyre all handbuilt anyway !

[Bilko]

Excellent work.

[Craig H]

Looking forward to getting mine

[camel]

what is the cast basket made of?

[Craig H]

Aluminium I think