Does anyone know why, when accelerating, it jumps out of second gear, usually only when the scoot is cold? Don't seem to have the problem when warm!
Dave
jumping out of gear
- Andy Pickering
- registered user
- Posts: 2172
- Joined: Sun Jan 25, 2009 10:15 pm
- Main scooter: GP
- Location: Hull
- Contact:
Mine always jumped out of gear under load both cold or warm, Sean changed the spring in the gearbox to a stronger one when the Avanti was fitted and its a distant memory now.
http://www.lambrettaspares.com/spares/g ... l1547.html
think this is the one
http://www.lambrettaspares.com/spares/g ... l1547.html
think this is the one
Ricspeed, gone but never forgotten RIP my friend #59
- drunkmunkey6969
- Moderator
- Posts: 2838
- Joined: Sun Jan 04, 2009 1:42 pm
- Main scooter: '69 Lambretta GP
- Location: North Yorkshire
- Contact:
Springs? Are you talking about clutch springs? It's the layshaft spring that needs uprating.djh66 wrote:I did fit extra strong springs from SR, perhaps they're not strong enough?
Sent from my HTC Sensation using Tapatalk
See our YouTube scooter channel for Tech-help: https://www.youtube.com/c/TheScooterFactory/videos
- djh66
- registered user
- Posts: 369
- Joined: Sun Jan 31, 2010 12:19 pm
- Main scooter: 150 special
- Location: Bedford UK
- Contact:
Are right, no, I uprated the clutch springs x 5. Thanks for the help.drunkmunkey6969 wrote:Springs? Are you talking about clutch springs? It's the layshaft spring that needs uprating.djh66 wrote:I did fit extra strong springs from SR, perhaps they're not strong enough?
Sent from my HTC Sensation using Tapatalk
Bring Me Sunshine COYH
-
jonnyb
- registered user
- Posts: 42
- Joined: Tue Mar 20, 2012 9:39 am
- Main scooter: Li150 Special
- Contact:
My li was jumping out of second under power, it was a combination of a worn gear selector and a worn second gear, I replaced both to be on the safe side as I didn't want to have to strip the gearbox down twice! I found a nos second gear cog for £30 and the selector was similar money.
Updated springs can sometimes make the gearchange feel a bit lumpy and hard work at the handlebar so I decided to use a new standard spring on this box.
Hope you get it sorted
Updated springs can sometimes make the gearchange feel a bit lumpy and hard work at the handlebar so I decided to use a new standard spring on this box.
Hope you get it sorted
