New Readspeed Adjustable CDI
Anyone with any feedback on them? I like the idea of an all in the piece of equipment like this.
-
Rich_T
- Dealer
- Posts: 540
- Joined: Fri May 29, 2009 8:07 pm
- Main scooter: Li Special
- Location: Birmingham
- Contact:
These CDi's are from the new 4 stroke Lambrettas. As I understand it, they are NOT compatible with 2T engines. The ignition only advances it has no retarding function (opposite to what 2T requires). These ignitions are taken from 4 stroke monkey and pit bikes, loads on Ebay.
-
Speed Demon
- Dealer
- Posts: 392
- Joined: Mon Feb 02, 2009 12:09 pm
- Contact:
As far as I know they are being made specifically to Readspeed's requirements with a selection of retard maps inside the CDI chosen that are of use on 2-strokes.
The idea is to offer a range of switchable maps like the Chiselspeed MTech, but all built in to the CDI box rather than being a bolt-on with additional wiring.
For the price that's been mooted they seem good value if they work as intended.
The idea is to offer a range of switchable maps like the Chiselspeed MTech, but all built in to the CDI box rather than being a bolt-on with additional wiring.
For the price that's been mooted they seem good value if they work as intended.
Get to SULK
-
jonashford
- registered user
- Posts: 445
- Joined: Wed Oct 20, 2010 4:47 pm
- Main scooter: Lambretta SX RB235
- Location: GRIMSBY
- Contact:
can anyone translate this diagram in to "easy" english? lolSpeed Demon wrote:As far as I know they are being made specifically to Readspeed's requirements with a selection of retard maps inside the CDI chosen that are of use on 2-strokes.
The idea is to offer a range of switchable maps like the Chiselspeed MTech, but all built in to the CDI box rather than being a bolt-on with additional wiring.
For the price that's been mooted they seem good value if they work as intended.
-
Andy Pickering
- registered user
- Posts: 2172
- Joined: Sun Jan 25, 2009 10:15 pm
- Main scooter: GP
- Location: Hull
- Contact:
Can you divulge the price that has been muted Sticky ? 
Ricspeed, gone but never forgotten RIP my friend #59
-
Speed Demon
- Dealer
- Posts: 392
- Joined: Mon Feb 02, 2009 12:09 pm
- Contact:
No, I'd rather check first.
Get to SULK
if these are like any other product i have ever bought from readspeed these will work as they are meant to and be of a very good quality. jerome has always been one of the most helpful dealers i have ever dealt with down to ringing me when i had a problem with a misunderstanding over order i placed. good luck with this jerome
-
jonashford
- registered user
- Posts: 445
- Joined: Wed Oct 20, 2010 4:47 pm
- Main scooter: Lambretta SX RB235
- Location: GRIMSBY
- Contact:
85 plus 5 p&p on ebay same from theyre shop
-
Andy Pickering
- registered user
- Posts: 2172
- Joined: Sun Jan 25, 2009 10:15 pm
- Main scooter: GP
- Location: Hull
- Contact:
Fair enough, at the right price it could be a real winner, feck me a decent CDI would be a bonusSpeed Demon wrote:No, I'd rather check first.
Ricspeed, gone but never forgotten RIP my friend #59