Eibar SX200

[RBG]

I'v just got myself a 1974 Spanish SX200 frame will Italian SX forks fit?

I've looked through the posts and it only gives the fork length for the later large
damper type.

[RICSPEED]

is the frame a chrome ring type at all ... not sure if spainish frames had them but if the forks are for non ring and your frame is also they should fit

[RBG]

The frame is totally bare, I'll take a measurement of the fork tube as soon as I can.

[Supereibar]

Italian chrome ring type forks will be too long... You will have a wide gap there to fill. Poss fitting a chrome ring will solve your problem.

Best,

J.

[eibarlad]

Around 74 the jet lost the chrome ring but the chrome ring headset/legshield's we're retained.
Just check the frame by the headset, tab at the back for steering lock non Chrome ring-no tab but thread for grub screw round the front of the tube means a ring was fitted.
Being a 74 it will have probably been badged as 'serveta'

[eibarlad]

[img][/img]
This is a 72 eibar, I'll measure the forks when I get in the garage

[RBG]

Had a really busy day but managed a quick look and its non Chrome ring.