vespa efl hub rebuild help!

If you want to tell us about or ask about a standard spec or restoration project....post it here.
Post Reply Previous topicNext topic
User avatar
Suede Ed
registered user
Posts: 221
Joined: Tue Jan 13, 2009 2:01 pm
Main scooter: SIL GP200
Location: Black Country
Contact:
Contact Suede Ed

:oops: Er how do you refit a speedo oil seal in the hub back plate, got the old one out (grease on brake shoes)from behind the lip, completely mullered the new one trying to fit it with the forks in, took the forks out and removed the back plate, still scoobied?, your help Gents :)
Top
User avatar
Suede Ed
registered user
Posts: 221
Joined: Tue Jan 13, 2009 2:01 pm
Main scooter: SIL GP200
Location: Black Country
Contact:
Contact Suede Ed

Maybe chuck the seal in hot water?
Top
User avatar
Suede Ed
registered user
Posts: 221
Joined: Tue Jan 13, 2009 2:01 pm
Main scooter: SIL GP200
Location: Black Country
Contact:
Contact Suede Ed

I know no one gives a s***, but anyway, slept on it, had a look this am, lip that seal was behind might come out? Applied heat, pinged out with screwdriver,part not shown on any info i could find, haynes etc..so another seal :oops: and off we go again. PXs are ace!
Top
gaz_powell
registered user
Posts: 1208
Joined: Sat Mar 28, 2009 1:10 pm
Location: hartlepool
Contact:
Contact gaz_powell

this will sound like no help but they normal fit in very easy with a bit a grease. When i do them i push them in with fingers and with a soft wood dolly tap round to get it level - i`ve never had an issue with them

mind there are 2 types - early and efl but not sure what the size difference is - think early maybe bigger

best of luck
Top
Post Reply Previous topicNext topic

Return to “Standard Scoots & Restorations”

  • Information

  • Who is online

    Users browsing this forum: No registered users and 3 guests

Powered by phpBB™ • Design by PlanetStyles