noisey 4th gear
-
- registered user
- Posts: 55
- Joined: Sat Jan 30, 2010 4:55 pm
- Main scooter: LI ser3 125 {TS1 230} 1963
- Location: tiptree,essex
- Contact:
hi lads, my son has a p200 its just started making a loud ticking noise but only in 4th! it had a new cush drive about 1000 miles ago and the gearbox is full of oil, selecting all 4 gears is not a problem.... any ideas thanks
how much!!!
-
- registered user
- Posts: 54
- Joined: Sat Apr 16, 2011 8:08 am
- Main scooter: 1961 TV2
- Location: Chaddesden, Derby
- Contact:
Is it a genuine or pattern cush drive, was it brand new or a very good second hand one and how old is the engine?
I had two PX's in last year with problems with the cush drive (teeth braking off and causing damage in the engine).
I was told that the later batches of the PX had so many corners cut as they were bringing production to an end, getting very cheap components and fitting them....
I had two PX's in last year with problems with the cush drive (teeth braking off and causing damage in the engine).
I was told that the later batches of the PX had so many corners cut as they were bringing production to an end, getting very cheap components and fitting them....

-
- registered user
- Posts: 55
- Joined: Sat Jan 30, 2010 4:55 pm
- Main scooter: LI ser3 125 {TS1 230} 1963
- Location: tiptree,essex
- Contact:
i would say its a patern part, but new, even the geezer in the scooter shop said he has never heard anything like this noise before, thought maybe he has broke a gear tooth??.
how much!!!
-
- registered user
- Posts: 54
- Joined: Sat Apr 16, 2011 8:08 am
- Main scooter: 1961 TV2
- Location: Chaddesden, Derby
- Contact:
Ok next question. Who fitted it, get them to look at it and sort it before it gets worse.

