I've just rebuilt my Mugello 225 engine to replace the RB and it completely escaped me that the carb cut out is on the other side!
Any recommendations on a good 15 litre plus tank?
Long Range Tank
imho theres only one - diablo
-
Train Driver
- registered user
- Posts: 604
- Joined: Wed Mar 11, 2009 11:32 am
- Location: PE31 8PT (Posh bit of Norfolk)
- Contact:
Just call him and tell to get on with itBilko wrote:I totally agree. I have one and it's the best tank there is, but I need another and I believe there is a back order for them.
and don't feed him biscuits
TS1 and PX stay in the garage (future barn finds) out on the GTS 300 when I go out on a scooter.
I know I’ll get there and back
I know I’ll get there and back
cut out the side of tank and weld it back up then the tank can be used on both types of motor
-
joeswoonara
- registered user
- Posts: 195
- Joined: Sun Jan 16, 2011 5:21 pm
- Main scooter: jet ts1
- Location: birmingham
- Contact:
theres only one and thats a Diablo 
never squat down when wearing spurs !!
Thanks for kind comments guys.
Your looking at about 8 weeks lead time at the minute Bilko. Might be willing to trade for at least some of the cost for parts you have or take your old tank in part exchange for a new one. Give us a bell.
Mark you can't cut out the other side unfortunately because the cutouts are so deep now. It would be very thin there and you'd lose the baffle inside. We used to do one like that which was popular but when AF brought out the Rapido 250 it forced us into an overdue cutout mod.
Your looking at about 8 weeks lead time at the minute Bilko. Might be willing to trade for at least some of the cost for parts you have or take your old tank in part exchange for a new one. Give us a bell.
Mark you can't cut out the other side unfortunately because the cutouts are so deep now. It would be very thin there and you'd lose the baffle inside. We used to do one like that which was popular but when AF brought out the Rapido 250 it forced us into an overdue cutout mod.
-
bicboy
- registered user
- Posts: 76
- Joined: Fri Jun 12, 2009 12:50 am
- Main scooter: S2, EID Built, Diablo tuned...
- Location: Nuneaton
- Contact:
Bilko i have the solution, Brew 11 bumper can, large cable ties to attatch to your torso some old Halloween kids straws "in cupboard you havent looked in for a while" and a fast flow tea strainer...SORTED any more info you so called experts need, drop me a pm or 12 cans of Carlsberg Export :freak:
Everything must be done to the Extreme.....
-
soulsurfer
- registered user
- Posts: 2539
- Joined: Thu Jan 08, 2009 2:43 pm
- Location: The Garden Of England
- Contact:
Al, have you ever thought about a smaller tank to keep the toolbox? (awaits one word answerDiablo wrote:Thanks for kind comments guys.
Your looking at about 8 weeks lead time at the minute Bilko. Might be willing to trade for at least some of the cost for parts you have or take your old tank in part exchange for a new one. Give us a bell.
Mark you can't cut out the other side unfortunately because the cutouts are so deep now. It would be very thin there and you'd lose the baffle inside. We used to do one like that which was popular but when AF brought out the Rapido 250 it forced us into an overdue cutout mod.
)Turn On, Tune In, Cop out!