ive been using NGK the type where you take the tip off the plug and the cap fits on the thread, everythings fine for a while then the cap comes off due to the vibration i suppose, no fun when ya doin 70 in the fast lane on the M1
Spark Plug Cap (TS1)
Question for all TS1 owners whats the best Spark Plug Cap to use?
ive been using NGK the type where you take the tip off the plug and the cap fits on the thread, everythings fine for a while then the cap comes off due to the vibration i suppose, no fun when ya doin 70 in the fast lane on the M1
ive been using NGK the type where you take the tip off the plug and the cap fits on the thread, everythings fine for a while then the cap comes off due to the vibration i suppose, no fun when ya doin 70 in the fast lane on the M1
Lambrettas are for life!
-
byron
- registered user
- Posts: 1226
- Joined: Wed Jan 07, 2009 11:45 am
- Main scooter: Li Special; scarred,but sound
- Location: norwich
- Contact:
I prefer the rubber type that retains the cap on the plug. that bit of wire on the type you are using does eventually wear after constantly being removed & refitted on that thread.
Do the rubber racing caps interfere with TV signals or are they suppressed like the plastic ones? I don't suppose it'll be a problem if they do when we all go digi anyway.
-
paulmgreen
- registered user
- Posts: 517
- Joined: Sun Jan 04, 2009 4:34 pm
- Main scooter: Lambretta Group 4 Race 200
- Location: Grantham
- Contact:
Definitely use the NGK rubber ones mate...... they are the best
YouTuve Vlog channel - https://www.youtube.com/channel/UCEhrgL ... vY_4Px2WTg
www.JPPLambretta.co.uk
Sponsors Replay Scooters JPPLambretta
www.JPPLambretta.co.uk
Sponsors Replay Scooters JPPLambretta
Cheers lads will give them a go 
Lambrettas are for life!