Im after a decent leggy tool box for my series 2's. They all look much of a muchness. There's one on page 42 bottom left corner of scootering this month....
Who sells them and what is the best in your opinions???
Thanks
Series 2 leggy tool box
- Andy Pickering
- registered user
- Posts: 2172
- Joined: Sun Jan 25, 2009 10:15 pm
- Main scooter: GP
- Location: Hull
- Contact:
Not sure of the type but there's one for sale on lcgb chaps..
Ricspeed, gone but never forgotten RIP my friend #59
- soulsurfer
- registered user
- Posts: 2539
- Joined: Thu Jan 08, 2009 2:43 pm
- Location: The Garden Of England
- Contact:
I'm hoping to modify one of these to fit http://scootrs.com/moreinfo.cfm?Product_ID=132 which looks like the one seen in Scootering. I did one on my S3.
Eden, are you & I on the same mission, I think I'm a month or two ahead of you, let me know if you need any info, although Ian is very good
Eden, are you & I on the same mission, I think I'm a month or two ahead of you, let me know if you need any info, although Ian is very good

Turn On, Tune In, Cop out!
- soulsurfer
- registered user
- Posts: 2539
- Joined: Thu Jan 08, 2009 2:43 pm
- Location: The Garden Of England
- Contact:
Very true, I've only ever had Series 3, and now a Series 2 which has so many unique features it can blow your mind, especially if your missing parts :freak:eden wrote:soulsurfer wrote:I
Eden, are you & I on the same mission, I think I'm a month or two ahead of you
It's a whole new world![]()
Turn On, Tune In, Cop out!
soulsurfer wrote:I'm hoping to modify one of these to fit http://scootrs.com/moreinfo.cfm?Product_ID=132 which looks like the one seen in Scootering. I did one on my S3.
Eden, are you & I on the same mission, I think I'm a month or two ahead of you, let me know if you need any info, although Ian is very good
i have seen these and they are not to bad ,they do need a bit of work though but far better than the stange px style ones they did
Its in bits scooter club: www.facebook.com/groups/132415046859320
- Tommy Boy
- registered user
- Posts: 62
- Joined: Wed May 25, 2011 2:35 pm
- Main scooter: Series 1 with a Twist!
- Location: Maidstone
- Contact:
I got one like this for my series 1 but a series 2 one, not a GP one like in this listing (and I don't think it was resurrection scooters).
Needed lots of fettling to fit what were I believe straight legshields. Fixings are at the lower horn casting bolts and a riveted bracket at the top (you have to drill the legshields inside the horncasting). Came with all fixings, locks an keys and is cavenous!
Will post some photos if your interested.
Needed lots of fettling to fit what were I believe straight legshields. Fixings are at the lower horn casting bolts and a riveted bracket at the top (you have to drill the legshields inside the horncasting). Came with all fixings, locks an keys and is cavenous!
Will post some photos if your interested.
M.D.M.A. Scooter Collective
go ahead mate i'm sure it will be appreciatedTommy Boy wrote: Will post some photos if your interested.

Its in bits scooter club: www.facebook.com/groups/132415046859320
-
- registered user
- Posts: 1038
- Joined: Mon Jun 15, 2009 6:56 pm
- Main scooter: Lambretta Eibar Series 2
- Location: Bedford, UK
- Contact:
battlam wrote:Im after a decent leggy tool box for my series 2's. They all look much of a muchness. There's one on page 42 bottom left corner of scootering this month....
Who sells them and what is the best in your opinions???
Thanks
You need one of these mate


Donnie.
pizza oven 

Its in bits scooter club: www.facebook.com/groups/132415046859320