Stud washers

[sydduckett]

Anyone care to reccomend the best washers for the chaincase studs. I have oil leaking out a couple of the stud holes so need to get them as sealed as poss. dont have to much thread so nothing to thick.

Ta
sEF

[soulsurfer]

The standard wavy washer are the thinnest I've seen, but I'd say your problem extends further than the washers if your threads are stripped.
http://www.scooterrestorations.com/lamb ... vy-washer/

[byron]

yes^
you shouldn't be relying on washers to seal the casing.
clean the faces and use a decent gasket, greased before fitting

[sydduckett]

ideally id like to get both faces milled properley as they are a bit manky....