.

Post pics & videos of your scooter, projects you're working on, a lovely Vespa that you saw at a rally, or anything else scooter related.
User avatar
Ripfx
registered user
Posts: 26
Joined: Mon May 25, 2009 4:57 pm
Location: South West (UK)
Contact:

soulsurfer wrote:Hi Karl, hope you're well,
Knowing what you're capable of, I'm sure this'll be as superb as your other projects, keep us posted mate ;-)
Hi Mike,
Im fine mate hope you are too,
Thanks for the words of encouragement :P

PS
I love the trainers 8-)
User avatar
Ripfx
registered user
Posts: 26
Joined: Mon May 25, 2009 4:57 pm
Location: South West (UK)
Contact:

Wayne Miller wrote:
RICSPEED wrote:i suppose the Rossa's sat higher at the back because of the petrol tank above the rear wheel ........incidentally .....where is the tank???
Ive got visions of ripfx reading your post and suddenly saying 'Oh f@@k!'

hope this isnt the case, funny as f@@k if it is though.

Best of luck finishing the build ;)
'Oh f@@k!' :shock:
User avatar
soulsurfer
registered user
Posts: 2539
Joined: Thu Jan 08, 2009 2:43 pm
Location: The Garden Of England
Contact:

Did you get this as a part fininished project or have you done it yourself, or is it Frank's doing?
Turn On, Tune In, Cop out!
User avatar
Ripfx
registered user
Posts: 26
Joined: Mon May 25, 2009 4:57 pm
Location: South West (UK)
Contact:

scooty wrote:
RICSPEED wrote:
just wondering what the purple ally thing is now

cant see a seperate rev counter so might be a shift light? rev counter could be in speedo tho

nice to see the use of centre single shocker :D
The purple ally thing is a digital water temp gauge.
The tacho, tank gauge and idiot lights are combined in the round digital speedo in the headset..
User avatar
Ripfx
registered user
Posts: 26
Joined: Mon May 25, 2009 4:57 pm
Location: South West (UK)
Contact:

soulsurfer wrote:Did you get this as a part fininished project or have you done it yourself, or is it Frank's doing?
All my own work but I did buy the white fibreglass panels from Frank
User avatar
Ripfx
registered user
Posts: 26
Joined: Mon May 25, 2009 4:57 pm
Location: South West (UK)
Contact:

RICSPEED wrote:nice ,

but im a little concered with the way it sits on the stand
Its a good quality stand and seems to be up to the job,
But as this is just a dry build I might also fit a side stand before I rip the scooter apart for spraying...
User avatar
soulsurfer
registered user
Posts: 2539
Joined: Thu Jan 08, 2009 2:43 pm
Location: The Garden Of England
Contact:

Ripfx wrote:
soulsurfer wrote:Did you get this as a part fininished project or have you done it yourself, or is it Frank's doing?
All my own work but I did buy the white fibreglass panels from Frank
I'll look forward to this one then ;-)
Turn On, Tune In, Cop out!
User avatar
RICSPEED
registered user
Posts: 3334
Joined: Sun Jan 04, 2009 11:30 pm
Location: YORK

Ripfx wrote:
RICSPEED wrote:nice ,

but im a little concered with the way it sits on the stand
Its a good quality stand and seems to be up to the job,
But as this is just a dry build I might also fit a side stand before I rip the scooter apart for spraying...
i was wondering if the rear wheel was too far up ....a pic off the stand i think
Its in bits scooter club: www.facebook.com/groups/132415046859320
MADSPEEDRB260
registered user
Posts: 305
Joined: Mon Jul 26, 2010 11:28 pm
Main scooter: lambretta gp200
Contact:

Looks good mate well done..
resin_nick
registered user
Posts: 42
Joined: Sun Feb 06, 2011 9:39 pm
Xbox live gamer tag: nicknutnut
Main scooter: wolf in a sheeps skin
Contact:

well nice fella like it . you not karl hissey are u ?
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 18 guests