best pipe for rb 230

[resin_nick]

whats the best pipe for rb 230 its got a nk at present that is good but want to improve it . ive had a franspeed before there good but there must be something better out now any ideas what about the sip pipe that gave that ts1 40bhp

[resin_nick]

http://www.sip-scootershop.com/EN/Produ ... emium.aspx

[Diablo]

Read Scootering mate. I'm struggling to find a single good thing to say about it.
The NK does work very well on RBs but dubious build quality.
The Franspeed seems more robust and has a new larger diameter stinger for cooler top end running.

Other than that its a case of getting one made. Expensive but possibly worth it.

[willwander]

My RB240 goes quite well with an ADS6

[resin_nick]

Read Scootering mate. I'm struggling to find a single good thing to say about it.
The NK does work very well on RBs but dubious build quality.
The Franspeed seems more robust and has a new larger diameter stinger for cooler top end running.

Other than that its a case of getting one made. Expensive but possibly worth it.

have you tried the sip bulet then ? there expensive £345 nicker lot of dosh but should be awesome ?

[Diablo]

The scootering test was done at my workshop. The bullet doesn't fit well at all and to be fair power was very dissappointing. Maybe it would work better with more racier port timings but the TS1 used wasn't std either.

[resin_nick]

The scootering test was done at my workshop. The bullet doesn't fit well at all and to be fair power was very dissappointing. Maybe it would work better with more racier port timings but the TS1 used wasn't std either.

yeah very dippappointing for thos guys as they claim it helps produce 40bhp in a tuned ts1 must have had nitrous or mayb they was using laughing gas lol

[resin_nick]

wheres your scoot shop ? do you know martin wing as i see your near where he lives

[cvjosh]

What about the JL road/race pipe. ( I forget the number) but it's not quite a race pipe or a touring?

[wax]

Hello Nick. How you getting on with your rusty racer? I would love to see how it turns out...... Wax