spaq disc brake
Anyone had any success setting one up tried different ways .bot the anti dive twist the backing plate causing the caliper to bind
-
- registered user
- Posts: 4823
- Joined: Tue Oct 25, 2011 9:50 pm
- Main scooter: Lambretta
- Location: Lanarkshire
- Contact:
Picture might help.
I usually replace the tie bar with Rose joints and a bit of threaded bar
I usually replace the tie bar with Rose joints and a bit of threaded bar
"Our dilemma is that we hate change and love it at the same time; what we really want is for things to remain the same but get better."
I knew that there was a fix but I couldn't find anything. Do you know the sizes of the joints /bar and bolts
Cheers
Cheers
-
- registered user
- Posts: 394
- Joined: Thu Jan 09, 2014 7:34 pm
- Main scooter: li150
- Location: York
- Contact:
That disc brake looks in a low position.
The tie bar looks long.
viewtopic.php?t=24975
The rose joints i bought are like these.
I have however removed by anti dive.
I did not enjoy it. So am just running a standard disc brake.
Robbie
The tie bar looks long.
viewtopic.php?t=24975
The rose joints i bought are like these.
I have however removed by anti dive.
I did not enjoy it. So am just running a standard disc brake.
Robbie
-
- registered user
- Posts: 1208
- Joined: Sat Mar 28, 2009 1:10 pm
- Location: hartlepool
- Contact:
/\ same here, didnt like it from the off.
Put it to go Cleethorpes and removed as soon as i got back !
Put it to go Cleethorpes and removed as soon as i got back !
-
- registered user
- Posts: 4823
- Joined: Tue Oct 25, 2011 9:50 pm
- Main scooter: Lambretta
- Location: Lanarkshire
- Contact:
The rose joints are M8 and the bar about 40 mm
The picture angle makes it look low - it's not as low as it looks
The picture angle makes it look low - it's not as low as it looks
"Our dilemma is that we hate change and love it at the same time; what we really want is for things to remain the same but get better."
Thanks for the help lads, cheers